Coupon Details
OBS releases a new and petite product in the name of Cube Mini; This device has a wattage output of 5W to 25W which is completely dependent on the battery level. Included with the starter kit is the Cube Mini Sub-Ohm Tank. This unique Sub-Ohm Tank can be utilized for mouth to lung or direct lung usage with a simple twist of the airflow control ring.
Starting off with the mod, the OBS Cube Mini retains the elegant feel and look of its older counterpart. Simplicity comes to mind internally and externally due to the removal of variable wattage, voltage, and a screen. On the face of the device lays a single oversized button that acts as the firing mechanism along with the on and off switch. Located under is an LED light that indicates if the vape mod is on, there are no atomizers, current battery life, and firing activation. This light will turn white if the battery is above 3.5V and red when the battery is below 3.5V. Powering the Cube Mini is an integrated 1500mAh battery, which is perfect for on the go travels when running high ohm coils. This device has a potential output of 5 to 25W or a voltage range of 3.3 to 4.2V, however, with a constant voltage output system, the maximum output of this device is defined by the current charge of the battery. Charging this device can be easily done through the USB port, once again located on the face of the device. The opposite side of this essential parts is a sleek “Cube Mini” emblem. On both sides of the OBS Cube Mini are resin panels, this panels match the drip tip of the OBS Cube Mini Sub-Ohm Tank that is included with the starter kit.
Included with the Starter Kit is the Cube Mini Sub-Ohm Tank, a vape tank that perfectly matches the size of the OBS Cube Mini. This vape tank measures at 21mm wide and 42mm tall. Depending on the resin finish chosen, the 3mm bore resin drip tip finish will match the color of the device. On the base of the Cube Mini Sub-Ohm Tank is a surprisingly smooth adjustable airflow control ring. Turning it counter-clockwise all the way through will allow users to utilize the direct lung airflow, measuring at 8mm by 1mm. A full clockwise action will have users encounter four 1mm by 1mm airflow slots; This airflow slots are meant for mouth-to-lung hits and can be fully adjusted for comfort and preference. Internally, the OBS Cube Mini Sub-Ohm Tank utilizes two types of coil, the S1 coil head and N1 coil head; The S1 coil head has a mesh coil construction and rated at 0.6 ohm, the N1 coil head has a regular kanthal coil construction and rated at 1.2 ohm. Each coil has its recommended liquid, the S1 for freebase e-liquid, whilst the N1 for nicotine salt. Juice enters the vape tank through a push to open tab located on the top of the tank with the indicator of a droplet. A simple nudge past the opening will allow this segment to come off, allowing for a more thorough cleaning.
MOD SPECIFICATIONS
5 to 25W Wattage Output
0.4 to 3.0 ohm Atomizer Resistance Range
3.3 to 4.2V Output Range
Constant Voltage Output
Output Based on Battery Charge State
Built in 1500mAh Battery
1.5A Charge Current
2 to 3 Hour Charge Time
Battery LED Light Indicator
White Light
3.5V or Higher
Red Light
3.5V or Lower
Single Button Control
Enlarged Firing Button
Screenless Design
Spring Loaded Gold Plated 510 Connection
Stainless Steel Thread Point
Zinc Alloy Construction
Product Dimensions:
71mm by 26mm by 26mm
ATOMIZER SPECIFICATIONS
21mm Base Diameter
2ml Max Capacity with Standard Glass
3.5ml Max Capacity with Bubble Glass
Push to Open
OBS Mini Replacement Coil Family
S1 Mesh Coil
0.6 ohm
Mesh Coil
N1 Coil
1.2 ohm
Kanthal Round Wire
Precision Adjustable Bottom Airflow
DL Airflow Slot
Single Wide Airflow Slot
8mm by 1mm
MTL Airflow Slots
Four Airflow Slots
1mm by 1mm
Stainless Steel Construction
Pyrex Glass
Stainless Steel 510 Threading
24K Gold Plated Contact
3mm Bore Resin Drip Tip
